After her technical launch in August 2019, the 182.9-metre Research Expedition Vessel (REV Ocean) has arrived at the Vard Brattvaag shipyard in Norway for the next phase of construction. The vessel ordered by Norwegian 4th richest man, Kjell Inge Røkke, is set to become the largest yacht in the world, beating out the current record holder, the 180-metre Azzam by 1.6 metres.
Photo: Lawrence Hislop via REV Ocean
REV Ocean earlier departed the Vard Tulcea shipyard in Romania, being pulled by the tugboat Kamarina.
Nina Jensen, CEO of REV Ocean, said upon the arrival:
Today is one of the most exciting moments in the development of our research vessel. We now watch with great anticipation as she will develop into a full-fledged and operational vessel with state of the art scientific equipment to be installed by the talented team at Vard Brattvaag. This is a major milestone towards achieving our mission of achieving one healthy ocean.
Photo: Lawrence Hislop via REV Ocean
REV has been commissioned by Norwegian ocean research company Rosellinis Four-10, owned by Norwegian industrialist billionaire Kjell Inge Roekke. His real-time net worth is estimated at $3.2 billion (Forbes). Meanwhile, REV Ocean is a not-for-profit foundation established and funded by Kjell Inge Røkke together with marine biologist Nina Jensen, former CEO of WWF Norway (Verdens naturfond).
Photo: Espen Gjelsten / Fuglefjellet via REV Ocean
The superyacht was designed by Espen Oeino for expedition activities has been built by commercial shipbuilder VARD. The renowned designer also worked on the world's largest expedition superyacht at the moment of writing, the 125-metre Lürssen Octopus.
Photo: Espen Gjelsten / Fuglefjellet via REV Ocean
Her robust exterior lines and modern features ensure she is able to cruise in arctic and tropical areas alike, with a hull built to ICE PC6 for navigation in ice. Two helipads can host drones and helicopter, while overhead cranes can lift and launch equipment weighing up to 20T over the side.
Photo: Lawrence Hislop via REV Ocean
REV Ocean will be equipped for conducting missions that cover the entire global marine ecosystem and will be an inclusive global vessel for testing and proliferating ocean solutions. The vessel will be used by scientists and innovators for solutions-oriented research that explore issues such as the impact CO2 emissions have on the ocean, plastic pollution, and unsustainable fishing.
The vessel is 182.9 meters long and will have the capacity of holding 55 scientists and 35 crew. Equipment on-board includes scientific trawls, sonar systems, laboratories, auditorium, moonpool, Triton submarine with 2,300-metre depth capacity, an ROV with 6,000-metre depth capacity and advanced communication equipment.
Photo: Lawrence Hislop via REV Ocean
The vessel will be constructed to run on diesel electric engines, with an additional 3MW lithium-ion battery pack for peak shaving and ensuring optimum efficiency. She will also qualify for the Polar Code adopted by The International Maritime Organisation for ships operating in Arctic and Antarctic conditions and can operate autonomously for 114 days.
Built for environmental research missions, the Research Expedition Vessel (REV) will also be available for charter for recreational purposes and expeditions.
Photo: Espen Gjelsten / Fuglefjellet via REV Ocean
George Gill, Project Director and Owners Representative, said:
REV’s arrival in Brattvåg is a crucial step in her development, she will lay here in Norway for the coming months, and this establishes the core groundwork for the research and operations of the vessel. Getting these important systems and her keystone machinery right is critical to her success and position within the Worlds research fleet.
Photo: Espen Gjelsten / Fuglefjellet via REV Ocean
Oystein Mikelborg, REV Ocean Operations Director, added:
The arrival in Brattvåg is a major milestone and a new chapter for REV Ocean. In the next few months, VARD Brattvaag will turn this into one of the world’s most advanced research vessels. The complexity and sheer scale of the work ahead is challenging, and I know it will be very busy days ahead both for the yard and the Owner’s team.
Photo: Espen Gjelsten / Fuglefjellet via REV Ocean
The vessel shall remain at the shipyard for eight-month outfitting, further headed to Germany for final stages of construction. The full completion is scheduled for late 2020/ early 2021.
German yacht builder YYachts has launched the Y6, a 20-meter sailing yacht designed for single-handed or short-handed operation. The carbon-epoxy constructed vessel combines customizable layouts with performance-focused engineering for autonomous cruising.The Y6 offers owners configuration options including three or four cabins, an office space, crew quarters, or a customized owner's suite. Interior materials include oak, walnut, and mahogany, with clients permitted to employ external designers. All sailing controls are accessible from the helm station, with an optional Y on Watch system providing remote technical support.An electric propulsion system is available alongside conventional options. The lightweight composite construction maintains performance in light winds while preventing interior odors, according to the builder."The Y6 is for those who want to sail independently, but without any compromise in design, comfort or performance," said YYachts founder Michael Schmidt.The yacht targets the 60-65 foot market segment, though pricing and delivery timelines remain undisclosed. The model joins YYachts' portfolio of minimalist sailing yachts, continuing the brand's emphasis on customizable, performance-oriented designs.No specific performance data or range estimates were provided for the new model. The Y6 represents the company's latest response to demand for owner-operated luxury sailing vessels.YYachts is a German shipyard that builds carbon sailing yachts between 70 and 100 feet in length. The portfolio consists of the Y7, Y8 and Y9 models; the Custom Division implements completely individual designs.Credits: YYachts
May 14, 2025
VisionF Yachts has unveiled interior details of its VISIONF 101, a 30.7-meter aluminum power catamaran currently under construction at the Turkish shipyard. The vessel, scheduled for launch in autumn 2025, represents the builder's largest project to date and will be the first aluminum catamaran of its size built to RINA Commercial Class standards.The VISIONF 101 features a shallow 1.45-meter draft designed for coastal cruising and access to secluded bays. Accommodation includes four guest cabins, with the owner's suite spanning 29.5 square meters across half of the starboard hull. The layout provides an 18-square-meter bedroom, 6.5-square-meter dressing room, and 5-square-meter ensuite bathroom. Three additional guest cabins continue the neutral-toned interior design scheme.Main saloonThe catamaran offers 132 square meters of flybridge space and a 103-square-meter main saloon. Crew accommodation consists of three cabins for five staff members. A 76-square-meter foredeck features an integrated cinema system, while the superstructure incorporates curved glass elements to maximize natural light.Main saloonPower comes from four Volvo Penta IPS 1350 engines producing a combined 4,000 hp, enabling a top speed of 17 knots. The roof utilizes Glass Fibre Reinforced Polyester construction to reduce weight.Owner cabinVisionF Yachts currently has eight models in production, including electric and aluminum catamarans ranging from 14 to 47 meters. The company has not disclosed pricing or ownership details for the VISIONF 101 project. The RINA Commercial Class certification indicates potential charter use, though operational plans remain unconfirmed.The vessel's design emphasizes maneuverability in both open water and coastal conditions, with the shipyard describing it as combining "comfort, luxury and refined aesthetics" for extended cruising. VisionF Yachts in Turkey was set up by Coşkun Bayraktar in Istanbul in 2019, but despite the shipyard’s relative youth it is a brand that is going places in the power catamaran world. In November 2020, VisionF Yachts debuted its first vessel, the VisionF 80. Credits: VisionF Yachts
May 14, 2025
The Azimut|Benetti Group has named Andrea Antichi as General Manager of its Azimut division, effective May 12, 2025. Antichi, who reports directly to CEO Marco Valle, will oversee strategic direction and operational objectives, including ongoing enhancements to the division's production facilities.A mechanical engineer, Antichi previously served as Chief Manufacturing Officer at Ferrari, where he worked for 19 years. His earlier experience includes technical roles at Piaggio and research in computational biomechanics at the Rizzoli Orthopaedic Institutes.Andrea AntichiMarco Valle stated: "Andrea's appointment is an important part of the current phase of evolution of the Azimut division, which commits to building the foundation of an ambitious vision for the coming years: accelerating industrial development with an increasingly structured approach, while continuing to innovate constantly."Antichi succeeds Daniele Romiti, who led the division since 2022. During his tenure, Romiti advanced sustainability initiatives, including energy self-generation systems and circular economy practices at Azimut’s production sites.Antichi remarked: "After nineteen years at Ferrari, a symbol of Italian automotive excellence in the world, I have chosen to come aboard the excellence of the yachting sector."The appointment reflects Azimut’s strategy of integrating nautical expertise with cross-industry leadership. The Avigliana facility, now capable of producing yachts up to 26 meters, remains central to the division’s industrial development. No further operational changes were announced.Azimut Yachts is an Azimut Benetti Group brand. With its Atlantis, Magellano Flybridge, S, Verve and Grande collections, Azimut offers the widest range of 10 to 40 meters.Credits: Azimut Yachts
May 14, 2025
Dynamiq has released new exterior images of its 52-meter GTT 170 superyacht, currently under construction at its Antalya shipyard in Turkey. The aluminum-hulled vessel, designed for shallow-water cruising with a 2-meter draft, targets owners in the U.S. and Middle East markets, with delivery scheduled for the 2027 Mediterranean season.The GTT 170 features naval architecture by Vripack, combining a top speed of 19 knots with IMO Tier III-compliant MAN V12 1,066 kW engines and an integrated battery pack. The stabilization system includes four electric fins and a Hull Vane aft foil to reduce pitch motion.Accommodation comprises five guest staterooms and an owner's suite, with a two-level beach club featuring a pool, bar, and spa with fold-out terraces. The sun deck includes an outdoor cinema and lounge areas.Dobroserdov Design developed the exterior, while Claudio Pironi & Partners created minimalist interiors using teak and natural marble. The yacht is being built at Dynamiq's Antalya facility with European subcontractors and Turkish craftsmen.Hull #2 is available for €29 million. The GTT 170's shallow draft enables access to Caribbean destinations like the Exumas and St. Barths, with 500 GT volume optimized for sub-50-meter length. No hybrid propulsion option was specified for this hull.Dynamiq was founded in 2014 by experienced yacht broker and designer Sergei Dobroserdov. Dynamiq is the first company in the superyacht industry to introduce an online configurator, allowing the yacht to be easily and transparently customized down to the last detail. Dynamiq unveiled its first launch at the 2016 Monaco Yacht Show.Credits: Dynamiq
May 13, 2025
Denison Yachting has entered an exclusive global partnership with French shipyard JFA Yachts to represent its Long Island brand of sail and power catamarans. The agreement focuses initially on models ranging from 70 to 100 feet.JFA's aluminum-hulled Long Island catamarans are designed for transoceanic cruising, with engineering by Marc Lombard Yacht Design Group and interiors by Darnet Design. The yachts emphasize lightweight construction, customizable layouts, and systems optimized for long-range performance. A Long Island 85 has recently sold, with a new Long Island 87 model scheduled for delivery later this year.Long Island 87David Johnson, Denison broker and U.S. brand representative, stated: "Alongside my colleague Simon in Europe, I'm proud to promote a shipyard that leads the world in building aluminum-hulled sailing and power catamarans—vessels purpose-built for owners seeking to explore the most remote parts of the world in total comfort."Simon Turner, overseeing European and global sales, added: "These exceptional, round-the-world-capable catamarans deliver an unmatched level of performance, luxury, and safety that is unparalleled anywhere else."Long Island 86 PowerJFA Yachts CEO Frédéric Jaouen noted: "We pride ourselves on attentively listening to our clients’ needs, exercising discretion, and developing trusted relationships. The savoir-faire of our team has earned JFA Yachts a reputation as one of the most respected shipyards in the world."The partnership expands Denison's portfolio of specialized cruising catamarans while providing JFA with global distribution channels. No specific sales targets or production figures were disclosed.Long Island 87 SailWith a rich family history dating back to 1948, Denison Yachting is a leader in the industry, providing comprehensive yachting services worldwide. With over 20 waterfront offices and a team of 90+ licensed brokers, Denison offers superyacht sales, yacht charter, crew placement, and new construction services. Their extensive experience and passion for yachting ensure a long-term perspective and commitment to excellence.French shipbuilder JFA Yachts was founded in 1993 by Frédéric Jaouen. JFA Yachts builds mono- and multihull power and sailing superyachts from 24 to 50 meters in length. Credits: Denison Yachting
May 13, 2025