Lloyd Werft Bremerhaven and The A group developed a 115 metre explorer concept. The extraordinary Apex has a range of 9000 miles, carries two 20 metre tenders and a helicopter in its own hangar.



Apex is a 115-metre long and 18.50-metre wide full custom yacht with a volume of around 8000 gross tons. The robust exterior of the explorer was developed by The A Group from Monaco, the naval architecture comes from Lloyd Werft Bremerhaven, where Apex will also be built. The concept behind this extraordinary yacht is called "without limits". No area is too remote or too rough for Apex not to reach. 



André Stegmann, Senior Project Manager at Lloyd Werft, comments: “Apex meets the demand of today's customers for stable, spacious and at the same time extremely robust yachts par excellence: the bow, which is almost four decks high, can cope with the heaviest weather and is also ice-going.” Up to 22 guests and 48 crew members travel on board and could cruise up to 9000 nautical miles non-stop at 16 knots. 


 
The exterior of Apex explains Matt Pegrum, Yachting Director at The A group, as follows: “It is characterized by large open spaces, especially at the stern. Standout features are two extra large and 20 metre long tenders parked to the side of the superstructure and launched via cranes and the infinity pool that forms the transition from the helipad to the party deck.” Even the side walls of the 12-metre pool are glazed and extend over the height of nearly an entire deck. Contrary to the rather open stern view, Apex gets a massive bow giving the explorer a powerful identity as well as a "ship-like" character and ensuring Apex safely reaches her destination even in very rough conditions on open sea. The yacht's exterior look is also defined by large window areas consisting of the largest panes ever used on a yacht. 
Behind the glazing, Apex's superstructures provides 2400 square metres of luxurious living space for owners and guests. The interior design will be completely customized to the owner’s requests. 


 
The A group developed an extremely progressive and unparalleled general arrangement for Apex that already amazes in the aft section. Beneath the fully certified helipad Apex shows a dedicated hangar for the helicopter to safely carry it even in adverse conditions. Also at aft and waterline level you will find the spa area including gym and massage room; a multifunctional room a bit further in front can be used as an infirmary. Guests sleep on the main or upper deck, with two of the four VIP suites each sharing a private saloon. The owner uses his own deck with dressing rooms, bathrooms, an office and a lounge, from which he has direct access to the party area and the infinity pool at the stern. Very remarkable are the two salons of Apex. On the upper deck, it has a spacious dining table for up to 26 guests. On the main deck, there is a cinema/conference room to port and an entertainment area to starboard with various game tables, including one for pool or snooker.

Credits: Lloyd Werft Bremerhaven

Latest News

42m Song of Songs Listed for Sale
The 42.2-meter motor yacht Song of Songs has entered the market at EUR22,888,000 through Camper & Nicholsons, with Chief Commercial Officer Asia Julien Solari and Sales Broker Della Pearce representing the central agency. The vessel is also available for charter in Southeast Asia.Constructed in 2023 by Heysea Yachts as the first model on their Asteria 139 platform, Song of Songs was designed in collaboration with VYD Studio. The 431GT yacht features a semi-displacement hull powered by twin Caterpillar C32 ACERT engines, achieving a top speed of 19 knots with a 2,000 nautical mile range at 14 knots cruising speed.The yacht's layout accommodates twelve guests across six cabins, including an upper deck master suite with private aft terrace, a main deck secondary master, and three VIP suites plus one convertible cabin on the lower deck. Crew quarters provide for seven staff members.Notable amenities comprise a 120 square meter sun deck with hardtop-covered dining area and bar, a main deck beach club with transformer platform, and a forward lounge area featuring a hot tub. The contemporary interior design utilizes light oak joinery and marble finishes throughout the living spaces.With 26,300 liters of fuel capacity and average consumption of 320 liters per hour at cruising speed, the yacht is equipped for extended voyages. A 120KVA Kohler generator handles onboard power requirements. The vessel's design emphasizes indoor-outdoor connectivity through extensive glazing and multiple al fresco entertainment areas.Credits: Camper & Nicholsons
Sixteen Swan Yachts to Compete in 2025 Rolex Fastnet Race
Nautor Swan will field sixteen yachts in this year's Rolex Fastnet Race, representing nearly the entire production history of the Finnish builder. The fleet includes models ranging from classic Sparkman & Stephens designs to contemporary German Frers creations.The 100th edition of the 695-nautical-mile race begins July 26 from Cowes, Isle of Wight, with a record 451 entries from 34 nations. The course passes Fastnet Rock off Ireland before finishing in Cherbourg-en-Cotentin, France.At a pre-race reception hosted by Nautor Swan Global Service at the Royal Air Force Yacht Club in Hamble, the all-female crewed Swan 46 Anne Bonny received the Spirit of Swan Award. The yacht is sailed by Belgian team "Swanne Bonny."Notable entrants include:Coco De Mer (Swan 62RS)Truwen (Swan 38)Galiana Withsecure (Swan 55)Miri (Swan 48)The participation follows recent Swan successes including ClubSwan 125 Skorpios' 2021 line honors victory and Swan 441 Best Buddies' dual handicap win at the Aegean 600. Simultaneously, the new ClubSwan 28 makes its competitive debut at Lake Garda.Nautor Swan was founded in 1966 in Pietarsaari, Finland. The builder entered the superyacht market in 1999. Since then, the yard has continued building high-performance sailing yachts in three different lines; ClubSwan, Swan Yachts and Maxi Swan Yachts. Credits: Nautor Swan
Azimut Yachts Unveils Renovated Avigliana Headquarters
Azimut|Benetti Group has completed the renovation of its corporate headquarters in Avigliana, Italy, representing a €50 million investment in the historic facility. The project was inaugurated on July 24 by Chair Giovanna Vitelli and CEO Marco Valle, along with Avigliana Mayor Andrea Archinà and approximately 1,500 employees.The redesign was led by AMDL CIRCLE and architect Michele De Lucchi, who oversaw the restyling of the main building and construction of a new multifunctional pavilion. Settanta7 handled the complete renovation of employee offices, implementing modern workspace configurations to facilitate collaboration. The project included significant upgrades to the building's energy efficiency systems.The new metallic-clad entrance pavilion creates a visual dialogue with the original 1990s structure designed by Gabetti & Isola. Floor-to-ceiling glazing throughout the complex reflects Azimut's nautical design philosophy, mirroring the company's 2003 innovation of replacing portholes with hull glazing. Three panoramic meeting rooms - named Gogamigoga, Goga and Goghina after founder Paolo Vitelli's boats - offer views of the Sacra di San Michele landmark.A new Virtual Reality center serves as the technical hub of the facility, allowing the Style and Technical Offices to collaborate on yacht designs and enabling owners to customize layouts through immersive technology. The workspace redesign eliminates traditional hierarchical office structures in favor of open, transparent environments with shared workspaces."The new pavilion honors our 50-year history while projecting our future," said Giovanna Vitelli. "Like the Louvre pyramid, it represents changing times while respecting the past."The renovated headquarters will become fully operational in September 2025. The project maintains the facility's original architectural character while incorporating modern workplace design principles. No operational disruptions are anticipated during the transition period.Founded in 1873, Benetti is the oldest Italian shipyard specializing in luxury yachts. Benetti designs, builds and sells composite vessels from 29 to 44m and steel and aluminum boats from 37 to over 100m. The fleet consists of five categories: Class, Oasis, B.Yond, B.Now and Custom to meet all the needs of the market. Benetti belongs to the Azimut|Benetti Group, the largest privately owned luxury yachting group in the world.Credits: Azimut|Benetti Group
Ferretti Yachts Launches New 800 Model in Cattolica
The first unit of the Ferretti Yachts 800 was launched on July 18 at the company's Cattolica shipyard. Measuring 24.47 meters in length with a 5.91-meter beam, the model completes the brand's flybridge range renewal initiated in 2018.Developed by Ferretti Group's Engineering Department and the Strategic Product Committee chaired by Piero Ferrari, the yacht features exterior design by architect Filippo Salvetti and interiors by Ideaeitalia. A version with shortened swim platform (maintaining 24-meter overall length) will be available for French market compliance.The main deck incorporates a 7-square-meter beach area with glass parapet, connecting to a crew section with three cabins accessible via portside walkway. Interior spaces feature 2-meter ceilings and extensive glazing, with the showcased unit displaying Classic styling with warm tones. The layout includes a living area with corner sofa, separate dining space with galley access, and isolated crew circulation paths.Accommodations comprise a master suite, VIP cabin, and two guest cabins totaling eight berths, all with en-suite bathrooms. The 40-square-meter flybridge offers an al fresco dining area, bar unit, and flexible aft lounge space.The inaugural unit is powered by twin 1800 hp MAN V12 engines, achieving a top speed of 31 knots and cruising at 27 knots. The Ferretti Group, led by Chief Executive Officer Alberto Galassi, is now one of the world’s leaders in the construction and sale of luxury yachts and pleasure vessels, with a unique portfolio of brands: Ferretti Yachts, Riva, Pershing, Itama, Mochi Craft, CRN, Custom Line and Wally.Credits: Ferretti Group
Sanlorenzo Prepares SL110A Asymmetrical Yacht for Cannes Premiere
Sanlorenzo will debut its new 33-meter SL110A motor yacht at the Cannes Yachting Festival from September 9-14, 2025. The vessel represents the latest iteration of the shipyard's asymmetrical design series, following previous SL102A and SL106A models.Developed in collaboration with Zuccon International Project for exterior design and Piero Lissoni for interiors, the SL110A combines structural innovation with performance capabilities reaching 27 knots. The asymmetrical hull configuration provides 15% more interior volume compared to conventional designs through strategic spatial planning, including staggered port and starboard gangways that maximize usable area."The asymmetry is not just aesthetic: it unlocks greater interior space, uninterrupted views, and a feeling of openness that transforms life on board," stated Sanlorenzo CEO Tommaso Vincenzi.The yacht's redesigned bow area replaces traditional anchor storage with an integrated sea-facing terrace and swimming pool. Retractable bulwarks create 8 square meters of additional deck space when anchored, while a pivoting stern platform accommodates both tender and jet ski storage. The full-beam master suite spans 45 square meters with direct access to the foredeck pool area.Interior accommodations include five cabins for 10 guests, with two convertible twin/double staterooms. Crew quarters provide six berths in three cabins with a separate mess area. Material selections feature Calacatta marble, resin-finished ceilings, and engineered wood paneling throughout living spaces.Bernardo Zuccon of Zuccon International Project noted: "Asymmetry on SL110A is not simply a formal gesture - but a tool to reshape the spatial harmony onboard." The design eliminates 30% of traditional structural obstructions compared to previous models, improving sightlines across 210 square meters of total deck area.Technical enhancements include upgraded sound insulation in engine compartments and improved stabilization systems. The flybridge offers configurable layouts as either sun lounge or dining space, while the main deck lounge incorporates sliding glass walls that expand to create a 22 square meter waterside terrace when stationary.Production will continue at Sanlorenzo's La Spezia facility, with the Cannes display model being the first of six scheduled builds for 2026 delivery. Base pricing starts at €18 million before customization options. The SL110A represents the continued development of Sanlorenzo's asymmetrical series, which currently accounts for 40% of the shipyard's motor yacht orders.Sanlorenzo was founded in 1958 in Viareggio by yacht builder Gionvanni Jannetti. In 2005, Massimo Perrotti became the majority shareholder in the shipyard. Sanlorenzo builds yachts ranging from 28.60 to 73 meters in length. Credits: Sanlorenzo