During Monaco Yacht Show Wally revealed renders of two models – wallywind130 and wallywind150. The models were developed by in-house design team headed by Luca Bassani with renowned naval architect firm judel+vrolijk & co and design studio Santa Maria Magnolfi.
wallywind130
Both models feature the values held dear by Wally – both have a huge speed potential, being entirely built in carbon fiber composite. Running aft from the plumb bow towards the open “Terrace-on-the-sea” transom, the sheerline only dips at the last moment. The foredeck is totally free of obstacles or features that could challenge the eye (or the toes) and the glass-set coachroof is so low profile that it barely troubles the lines of the yachts.
wallywind150
“The wallywind150 is the natural evolution of the Wally144 Kauris IV launched in 2020. It includes some Wally iconic features, such as the cockpit protected by the high bulwarks, the Terrace-on-the-sea and the raised saloon. On the other hand, it also introduces a few more revolutionary features such as the forward guest area which doubles as a tender garage when not in use, a truly private owner’s terrace aft as well as a new interior layout to enhance flexibility for the owner,” says Luca Bassani, Wally Founder and Chief Designer.
wallywind130
By contrast, the design of the bulwarks is such that the coachroof hides a huge and convivial raised salon that flows smoothly into the cockpit without a single change in levels. No fewer than three social zones occupy more than a third of the boat’s length to create an entertaining space that is unparalleled on yachts of this size. Among them is the famous ‘Terrace-on the sea” that Wally pioneered in 1998 with Tiketitan.
wallywind150
Twin helm stations are discreetly positioned just inside the raised bulwarks, allowing guests to be as involved in the sailing as they wish. Sail controls and navigation displays are set amidships, but there is barely a rope to be seen.
Beneath the foredeck is hidden a tender well for storing a generously sized tender (4.50m – 14’ 9’’ – on the wallywind130; 5.00+m – 16’ 4’’ – in the wallywind150) completely out of sight. On the larger superyacht, this well doubles as a forward guest cockpit that can be converted into a cushion-lined dining area or lounge. In the transom, the hydraulic passerelle stows flush and can be angled up to the quayside or down for elegant access to the water.
wallywind130
The full carbon lay-up guarantees exceptional hull stiffness, rapid acceleration and great response on the helm. Full pre-preg vacuum lamination with careful post curing at 85°C ensures that lamination is flawless and weight is kept to an absolute minimum.
A retractable keel system allows both yachts to switch from performance to shallow-waters cruising mode. The twin rudder setup similarly balances fingertip control under way with easy access. A variable pitch propeller provides optimum thrust under power while folding under sail to offer almost no drag.
wallywind150
Central to both boats’ design is Wally’s smart “double deck” layout, which puts the key social areas up under the spectacular coachroof. It features an almost dreamlike structure combining carbon ribs with vast curved panes of glass and delicately lit panels. The result is a panorama that takes in the whole horizon, plus the sails overhead.
wallywind130
Below decks, both the wallywind130 and the wallywind150 offer comfortable accommodation for guests – up to eight in the smaller yacht and 10 in the bigger one. The 130-footer gives the owner the choice of a cabin forward or right aft, where the broader beam allows facilities including a private TV lounge and a vast his ‘n hers bathroom.
wallywind150
On the wallywind150, the cabin is always aft to provide access to the owner’s private cockpit. With room for walk-in wardrobes, a private office and multiple seating areas, the breath-taking owner’s cabin is more akin to those found on larger 60m (200’) yachts. The TV or playroom forward can also be easily converted for kids or a nanny to create a fifth cabin.
Wally is part of Ferretti Group. It was founded in 1994 in Monaco by Luca Bassani and is the only yachting brand to be a two-time winner of the ADI Compasso d’Oro, the world’s most important award for quality and design.
Credits: Wally
Van der Valk embarked on a monumental endeavor with the construction of Project EVO, a bespoke 40-meter superyacht. This ambitious project, the largest ever undertaken by the yard in terms of length and volume, promises to redefine luxury at sea. The owners were inspired by an exceptionally attractive design from Franco Gianni of SFG Yacht Design and Doga Naz Cebeci from Fancy by Dada, Project EVO boasts a sleek exterior and meticulously detailed interior.Ordered by seasoned clients with a penchant for high-performance vessels, Project EVO symbolizes the culmination of their yachting aspirations. With a vision to craft a tailor-made masterpiece for their family, the owners turned to Van der Valk, drawn by the promise of Dutch precision and excellence. The yacht's design journey, intricately guided by the owners, involved a transformative evolution led by Cristiano Gatto Design.Cristiano Gatto reflects on the project's inception, stating, “Our collaboration began with a shared vision to infuse the interior ambiance into the exterior design, culminating in a harmonious fusion of aesthetics.” The resulting profile, a synthesis of innovative proportions and lines, reflects the collective ingenuity of the design team.Beyond aesthetics, Project EVO is engineered to deliver unparalleled performance, with a round-bilged fast displacement hull and a target top speed of 24 knots. Compliant with ABS class standards and IMO Tier III emissions regulations, the yacht exemplifies Van der Valk's commitment to superior craftsmanship and environmental sustainability.<iframe title=vimeo-player src=https://player.vimeo.com/video/937794356?h=3c621b1611 width=640 height=360 frameborder=0 allowfullscreen></iframe>With accommodations tailored for ten guests across lavish staterooms and crew quarters, Project EVO promises a luxurious retreat at sea. Yoeri Bijker, head of sales at Van der Valk, affirms the yard's capability in delivering bespoke superyachts of exceptional quality, stating, “Project EVO epitomizes our dedication to excellence, offering clients the opportunity to realize their yachting dreams without compromise.” Van der Valk is a family-run company building comfortable, innovative and efficient (semi) custom motor yachts from 18m to 45m. From its humble roots in the 1960s, Van der Valk today has a global fleet of over 1000 motor yachts. Credits: Van der Valk
April 26, 2024
Northrop & Johnson has been named the exclusive sales broker by Ares Yachts for the globally anticipated sale of the shipyard’s flagship, Simena. Currently in the outfitting stage in Antalya, the 62-meter superyacht is slated for delivery in March 2025.“We are pleased to collaborate with such a reputable company,” states Kerim Kalafatoğlu, Chairman of Ares Yachts. “We trust Northrop & Johnson to introduce our remarkable flagship to the market and promote her effectively.”“Northrop & Johnson is honored to represent Ares for the sale of the magnificent 62m Simena, set for delivery in March 2025. Ares has established itself as a leading shipyard in Turkey with an exceptional track record of over 230 vessels. Simena presents a rare opportunity to acquire a yacht of exceptional quality at a competitive price,” says Patrick Coote, Europe Managing Director of Northrop & Johnson.Simena, Ares Yachts' 62-meter flagship, entered the outfitting stage in November. The completion of outfitting, including joinery work, will precede the installation of the rigging system.Kerim Kalafatoğlu and Patrick Coote“Exterior paintwork is in progress, and the superstructure and hull connection have been completed,” shares Piraye Sahinkaya Orhun, Managing Director of Ares Yachts. “Construction of the mahogany planking for the superstructure and doghouse is underway, along with the insulation, wiring, and piping from the aft crew accommodation.”Designed by Taka Yacht Design and Design Unlimited, Simena epitomizes classical and modern design elements. The vessel, designed to RINA Class C standards, boasts traditional teak decks and varnished Sipo Mahogany exterior joinery.Accommodating up to 12 guests and nine crew members, Simena offers luxurious onboard living. Its owner’s suite is strategically located forward on the main deck. Equipped with a sophisticated hybrid drive system, the yacht can operate silently under electric power at speeds up to 6 knots. Additionally, a 882 kW diesel engine complements her 220kW electric motors, allowing for a top speed of 14.5 knots and a cruising range of 4,000 nautical miles at 11 knots.To maintain the yacht’s clean interior aesthetics, modern design elements have been discreetly integrated, including hidden TV lifts in the saloon and master suite. Walnut forms the basis of the interior, complemented by textured leathers, fabrics, and antiqued brass accents. Showers feature a blend of patterned tiles alongside Calacatta Oro and Patagonia White marbles, offering a blend of contemporary comfort and classic elegance.Ares Yachts, situated in Antalya Free Zone on Turkey’s south coast, spans 40,000 square meters of build space across four large sheds. Besides Simena, the shipyard is concurrently working on other projects, including the 50m motor yacht Spitfire and a 54m explorer yacht known as Project Atlas. Additionally, Ares Yachts is developing a 65-85m yacht range in collaboration with Lateral Naval Architects.Credits: Northrop & Johnson
April 25, 2024
As the Palma International Boat Show commemorates its 40th anniversary, it sets its gaze firmly on the future with two groundbreaking initiatives: an economic impact study and certification as a sustainable event. Organized by the Regional Ministry of Enterprise, Employment, and Energy, in collaboration with the Balearic Islands Institute for Business Innovation (IDI) and the Balearic Yacht Brokers Association (BYBA), the fair opens today at Palma’s Moll Vell.The economic impact study, conducted in partnership with the Directorate General of Economics and Statistics of the Ministry of Economy, Finance, and Innovation, aims to assess the fair's contribution as an economic driver for the city and the region. Simultaneously, the fair is pursuing certification as a sustainable event, committing to minimizing its carbon footprint and promoting responsible practices.With a record 295 exhibitors, including international companies, the event promises to showcase an array of quality nautical products across its 86,000-square-meter venue. Notably, the Palma Superyacht Village will feature a dedicated area for boats over 24 meters, complemented by the introduction of the Superyacht Square, emphasizing innovation and sustainability.As part of the anniversary celebrations, the Balearic Superyacht Forum, the first international superyacht forum in the Balearic Islands, will convene around 300 industry professionals, enthusiasts, and experts to discuss the sector's future. Additionally, the fair will pay tribute to the companies that have contributed to its success over the years, recognizing their pivotal role in shaping the event's legacy.The 40th-anniversary festivities will culminate in a series of activities on April 26th, featuring music, entertainment, and a captivating drone show. Credits: The Palma International Boat Show
April 25, 2024
ISA Yachts reveals the initial glimpses of the ISA Custom 80 meters as it embarks on its interior outfitting phase. Designed by Espen Øino International for the exterior and Peter Marino Architect for the interior, this flagship project marks a new milestone for the shipyard. With a gross tonnage of 2150 GT and a length of 80 meters, the vessel is scheduled for delivery in 2026. In addition to this custom 80-meter, currently at the Ancona Shipyard there are other three ISA Yachts-brand constructions under way: an 80-meter of the Gran Turismo line (with exterior and interior by Enrico Gobbi Team for Design) due to be delivered in 2027, and two 66 meters. One of these has both exterior and interior designed by the Nuvolari-Lenard Studio, while the other has exterior design by Vallicelli and interior design by Enrico Gobbi – Team for Design, and they are set to be presented in 2026.Dedicated to producing forward-thinking superyachts made only with superior quality materials, ISA Yachts is a leading global superyacht and megayacht builder. Every ISA superyacht is uniquely designed to her owner’s briefs, and is built using the highest technology, the best quality materials and the finest furnishings and finishes. Currently in build are two 80-meter projects due to become the new ISA Yachts flagships. ISA Yachts is part of Palumbo Superyachts, which also includes: Columbus Yachts, Mondomarine and Extra Yachts.Credits: ISA Yachts
April 25, 2024
Denison Yachting celebrates the successful delivery of superyacht Extra Time, the second hull in Conrad Shipyard's esteemed C144S series. Yacht broker Alex G. Clarke lauds Conrad Shipyard's exceptional craftsmanship, highlighting the collaboration with Reymond Langton Design and Diana Yacht Design as a testament to the vessel's quality.Extra Time boasts luxurious amenities, including a spacious tender garage, beach club, hot tub, and accommodations for up to 12 guests. Built to Lloyds MCA LY3 standards, the yacht features a steel hull, aluminum superstructure, and impressive technical specifications. Clarke, who attended the christening ceremony in Gdańsk, praises the dedication of the Conrad Shipyard team and expresses confidence in the yacht's performance.With Hull #2 and #3 sold, Denison Yachting now offers Hull #4 exclusively for sale, asking €27.7 million, available with a late 2026 delivery.Conrad Shipyard is located in Gdansk, Poland and specializes in building steel, and aluminum luxury yachts ranging from 24 to 100 meters in length.Denison has long been a leader in the yachting industry with a rich family history dating back to 1948, and the start of Broward Marine in Fort Lauderdale. Today, the company provides complete yachting services worldwide, including superyacht sales, yacht charter, crew placement, and new construction. Denison operates out of 21 waterfront offices in the United States, and one location in Monaco with a team of 100+ licensed and bonded yacht brokers. Credits: Denison Yachting
April 25, 2024