Aiming to tackle one of boating’s most stressful maneuvers – docking – Volvo Penta has revealed an advanced self-docking solution, targeted for launch in 2020.

The Gothenburg, Sweden, stopover of the Volvo Ocean Race was the scene for the unveiling of what could be the most sought-after system in modern boating – Volvo Penta’s self-docking system. In a live demonstration, a 68 ft yacht fitted with the technology skillfully maneuvered itself into the tightest of spaces between two of the Volvo Ocean Race 65 racing yachts.

The unveiling of the pioneering self-docking yacht technology is the latest in Volvo Penta’s ongoing ‘Easy Boating’ philosophy to make boating simple, enjoyable and accessible to more people. At its heart is the joystick-controlled Volvo Penta Inboard Performance System (IPS), a complete and integrated propulsion system – from the helm station, via the engine, all the way to the propellers.



Narrow berths, changing wind and sea conditions and congested marinas will all soon be less of a challenge when docking. This is thanks to the responsiveness of the Volvo Penta IPS system, coupled with sensors and advanced navigation processing power. And, just as the system helps get the boat into the dock easily and safely, it can also enable it to securely take-off from the dock in an automated fashion.

Prototypes of Volvo Penta’s self-docking technology are currently undergoing development trials. The automated docking capability comes due to the onboard electronic vessel control system (EVC), which computes steering and drive calculations in relation to the boat’s actual position and four sensors sited on the intended berth.

Easy docking

“Docking is one of the most challenging boat handling maneuvers – getting it wrong can be embarrassing, expensive and precarious,” says Björn Ingemanson, President of Volvo Penta. “Our IPS system has already taken great strides in making docking easier, and this new self-docking feature takes that process one important stage further. Its sensors and onboard computers react in milliseconds to changing wind and sea conditions, constantly making micro adjustments in power and steering angle of the IPS drive to keep the boat on its intended course into a safe berth. If necessary, the docking process can be paused, and the system will hold the boat stationary in the water. Even in changing sea conditions it can make the sea appear to stand still.”

How it works

Automating the docking process involves three distinct phases. Firstly, as the boat nears its berth, the system recognizes that it has entered a ‘catch zone’ and sends out a signal to the captain that it is ready to dock. Once the captain has activated the self-docking function, the boat is then (aided by GPS), automatically moved into a ‘docking ready’ position. Once the captain has initiated the final stage, the system uses a combination of GPS and sensors, both those fitted onboard and additional sensors fitted to the destination dock to automatically move the boat into a safe berth.



“We have long had the ambition to make docking as easy as possible,” comments Johan Inden, Chief Technology Officer at Volvo Penta. “The first step towards this was in 2006, with the launch of our joystick docking technology. This was followed by the introduction of the Dynamic Positioning System, which automatically maintains a boat’s heading and position, even during strong currents or windy conditions – ideal when preparing for docking. Now, we are taking the next important step by enabling the boat to dock itself. With our easy docking concept, we aim to attract more people to enjoy the boating experience.”



Upgradeable option for Volvo Penta IPS-equipped yachts

Another attention-grabbing feature of the forthcoming system is that it will be available not only for the latest IPS equipped boats – a retrofit version of the function is also planned, something that would make an attractive upgrade to thousands of boat owners.

The initial focus for Volvo Penta’s self-docking system will be individuals who can install the system on their own private docks. Longer term, it is believed that the technology will be of considerable interest to harbors and marinas, allowing IPS-equipped boats fitted with the system to dock in complete safety and accuracy. An additional future scenario for the self-docking system is that it could be integrated with Volvo Penta’s Easy Connect application (app). The app could allow users to check if the nearest marina is equipped with the appropriate self-docking technology – or even perhaps use it to secure a parking space.


Sensors on the berth help guide the yacht safely into its docking position.

Safety is a primary factor in the ongoing development of the feature and, as with similar ‘self-parking’ technology in the automotive world, Volvo Penta’s docking system is not designed to be fully autonomous. While the system will also feature surround sensors that provide anti-collision alert and avoidance, the captain needs to remain at the helm during the docking process, ready to intervene if necessary.

Check our Timeline platform to get the full access to our analytics platform, that offers you a detailed report on the timeline of each superyacht, real time market view to see the yacht market developing and much more!

Latest News

69-metre Benetti superyacht Spectre sold
Listed for sale by Peter Thompson at Thompson, Westwood & White, the buyer in the deal was introduced by Superyacht Sales& Charter. "Spectre" was asking €65,000,000."Spectre" is a 69-meter Full Custom Mega Yacht with a steel hull and an aluminium superstructure on five decks. The name pays tribute once again to James Bond after “Quantum of Solace” and “Diamonds Are Forever”. It’s first owner John Staluppi fell in love with the leading character in the series of films inspired by the novels of Ian Fleming.This original superyacht was developed around the latest marine technologies and combining different styles and philosophies of interior decoration. References to Art Nouveau in France mixed with modern details designed by Giorgio M. Cassetta. He said that he was very fond and proud of this project. As it was the perfect example of the ideas of the owner and the shipyard. John and Jeanette Staluppi, with their outstanding energy, pulled us together on to imagine and develop with everything that could be desired on a boat this size.The style of the interiors, created by Benetti’s Interior Style Department, feel of some French hotels and boutiques, standing out from Staluppi’s previous yachts in a more classical way. For example, the floor in the main lounge draws inspiration from the Art Nouveau style flooring in a Paris resort, with symmetrical forms and clean-cut geometrical patterns. Other references to French taste are the windows, a reminiscent of Paris’ typical Art Nouveau shops.The megayacht features with a swimming pool and touch and go helipad. Accommodating 12 guests in unforgettable comfort, the layout has two owner’s cabins: one has a private terrace, a sun lounging area and a hydromassage tub; two VIP cabins on the Main Deck and two guest cabins on the lower deck.Benetti’s most advanced construction technologies is the Ride Control technology by Naiad Dynamics - the system significantly increases stability during navigation and improves comfort on board with the help of four stabilising fins and three vertically-adjustable blades.The lines of the hi speed cruising hull by Dutch firm Mulder Design, deliver maximum navigation efficiency, with a range of 6,500 nautical miles at 12 knots and a top speed of 21.2 knots, which is 30% more than a traditional displacement hull.A seven Full Custom yachts planned in 2018/2019, including 3 giga yachts over 100 meters each, now are building in parallel at the Benetti’s Livorno shipyard.
Codecasa launches new 43m Vintage Series yacht
Italian builder Codecasa has launched a 43-metre Project 122, the latest superyacht in their Vintage series featuring a 43 meter hull. The yacht was initially launched in summer 2018 at the company’s Viareggio facility, and is to be delivered to her owner in May 2019, after sea trials.The yacht with a beam of 9 metres and a maximum draft of 2,6 metres attributes a steel hull and aluminium superstructure. Engined by two Caterpillar 3512C of 1,650 HP, she reaches her maximum speed at 16,5 knots. At the same time, with a comfortable cruising speed of 11 knots, she boasts a cruising range of 4,000 nautical miles thanks to her fuel capacity of 65,000 litres.Project 122’ interior design concept was developed by the Codecasa team. The concept implements a combination of elegance and modernity, with predominance of light and neutral colours applied to natural materials.The yacht’s accommodation capacity amounts to ten guests within 5 cabins, including the owner’s full-beam suite. The latter is located on the main deck, featuring two en-suites. As to the staff, there is accommodation space for up to 9 crew members on-board.In contrast to previous 42-metre versions, Project 122 boasts a Sun Deck Jacuzzi and a Captain’s Cabin situated on the upper deck. The yacht’s on-board tender storage holds a Zodiac rescue boat and a Castoldi 21 jet tender. Codecasa is planning to display the yacht at the upcoming Versilia Yachting Rendez-Vous, held in Viareggio in May. Meanwhile, the company's yard is busy constructing two more vessels, a 55-metre and a 65-metre projects to be finished later this year.
Mercedes to launch a new boat out of their collaboration series with Cigarette Racing Team
During the recent Miami International Boat Show 2019, a new product from the series of collaborations between Mercedes-AMG and Miami builder Cigarette Racing Team was released. This year’s model was inspired by Mercedes-AMG GT 63 S Coupe, featuring the same colour patterns and design motifs.This 12,5-metre racing boat has been christened 41 AMG Carbon Edition. One of her most significant features is carbon-fibre construction developed by Cigarette engineers in order to resonate with Mercedes model. It is evident, that Carbon fibre becomes a new trend among fast boats structure materials, for instance, as it is in the latest Pershing 8X. Still, the constructors claim, their new model is one of a few boats of that kind, where carbon is used as not complementary but major constructing material.Cigarette Racing Team’s president Skip Braver emphasises that from his point of view there are not so many differences between cars and boats. “Just as they did with the car, we lightened the boat without sacrificing performance. We modified the design by lowering the centre of gravity and used carbon fibre across the whole boat,” he said.The innovations introduced in hull construction enabled the builders to make the new boat 227 kg lighter than previous 50 Marauder AMG powerboat built in collaboration. 41 AMG Carbon Edition lays on sandwich construction with carbon-fiber structural layers around the boat’s lightweight hull. The deck and hardtop are also made of carbon fibre.Daimler AG and Cigarette work together on design concepts of all AMG boats. This year’s edition transmits the colour patterns of Mercedes saloon, easily recognisable in the boat cabin, with a prevalence of red and black. It is noticeable, that normally dark colours, especially black, are avoided in boat upholstery design, as they easily get hot in the sun. Within this boat, the dark colours can be used due to upholstery materials featuring cooling ability, that can decrease heat up to 30 percent.AMG 41 is equipped with Mercury Racing 400R engine of 1,600 horses. Thus, the boat is capable of reaching her maximum speed of 72 knots with 8 passengers on-board. Meanwhile, she cruises comfortably at around 55 knots with a maximum capacity of 20 passengers. Due to carbon materials used in the construction, a hull becomes firmer, lowering the boat’s flexibility and the “feeling of ship motions” even at the highest speed.Hull construction for such models normally takes about 8 months, including 2 months set aside for painting. Hand-stitched upholstering also takes more than a month. During the process, the project goes through multiple approval stages, so that it would finally satisfy both parties involved in the process.According to Braver, the two brands have already started working on their next joint project. “It feels like mutual admiration and when we hear them talking, it seems like they feel the same. It’s an honor to be partnering with them,” he concludes.
CRN and Nuvolari Lenard to build a 60m superyacht
Italian builder CRN has recently announced sale of their new project, a 60-metre superyacht with custom aluminium hull yet assigned to number 141. She is going to become the newest project produced from CRN’s partnership with Nuvolari & Lenard design studio, that has been lasting for more than 50 years.CRN Ancona facilityThe design of the model was developed by the yard’s technicians, while interior and exterior concepts were finalised by the studio. Thus, CRN Project 141 is conceived to feature advanced high-tech solutions and dynamic lines in design concept. The new vessel will be built at CRN’s Livorno facility. She is scheduled for delivery to the owner in 2023. Further details and renderings of the project will be released as soon as they become available.CRN Ancona facilityCRN, being a part of the Ferretti Group, specialises in design and construction of fully custom aluminium and steel yachts with LOA of up to 100 metres. The company’s Ancona facility, where all the CRN megayachts have been built, occupies almost 80,000 square metres. At the moment, the yard is busy building four fully custom CRN yachts, including recently sold 70-metre CRN 139 yacht devised by Vallicelli Design. At the same time, 18 custom line models of 30 to 42 metres in length, two 50-metre Riva and two Pershing 140 units are currently being constructed at the yard.
The fourth VSY superyacht: 64m Project 003 nears her delivery
Italian yacht builder Viareggio Super Yachts (VSY) has released new renderings of their 63,8-metre superyacht Project 003, currently being under construction at the company’s facility in Viareggio. The vessel sold in 2016 is now going through final constructing processes, while the delivery first planned for September 2018, has been rescheduled to the beginning of 2019.The yacht’s exterior design has been developed by Espin Oeino. With a beam of 11 metres and a draft of 3,15 metres, Project 003 features total 915 square metres of guest areas. Within that space, she offers accommodation to up to 12 guests, with the staff of up to 16 members on-board. There are six cabins, including the master suite with panoramic views and outdoor terraces.Interior design concept was commissioned to Darnet Design studio based in France. The design was inspired by the owner’s previous yacht, with the focus put on spacious rooms and warm colours, visible in leather panels and polished marble. Key interior motif is implemented in decorative steel and nickel panels resembling coral reefs, that will reflect the owner’s passion for scuba diving. Furthermore, Project 003 is equipped with on-board diving centre for 12 people at a lower deck. At the same time, the sundeck will be equipped with bar area, infinity pool and fire pit.Project 003 will be powered by a pair of 2,682 HP Caterpillar 3516B engines. Thus, she will reach her maximum speed at 17 knots, and cruise with a range of 5,000 nautical miles at 12 knots. The naval architecture by Laurent Giles studio is featured with bulbous bow, for better seakeeping under rough weather conditions.Although this yacht is named Project 003, it is in fact the fourth VSY superyacht. However, number 3 represents the conceived evolution of similar models Candyscape II and Roma. At the moment, the yard is also busy working with Siemens and Lloyd’s Register on hydrogen fuel cells technology for their 65-metre project Waterecho.